Prism Poles
Prisms, poles, more prisms, even more poles. We have them all!
Robotics Carbon Fiber, One Section Prism Pole
PN: 5129-52, 5129-52, 5129-72, 5129-73
-
These carbon fiber telescoping poles are graduated to read direct for a 135 mm prism height
-
Adapters will achieve other prism heights
-
Features include a stainless steel pin which locks the inner pole
-
Holes are spaced every 0.5 ft
-
Poles include the popular TLV™ lock which has a 40-minute vial built-in
-
Inner poles have dual graduations: centimeters and 0.01 ft
-
Collapse to 4.97 ft (1.52 m) and extend to 8.53 ft (2.60 m)
-
Weighs 2.30 lb (1.04 kg)
Robotic Model Aluminum Survey Pole with Locking Pin
PN: 5512-14-FOR-GT
-
Can be easily converted to different heights by using one of our Quick Change Pole Height Adapters (PN 2090-XX)
-
Can be ordered with either “GT” (10ths/100ths) or “GM” (metric) outer gradations
-
Can order the inner kit separately with Part Number INNER-KIT-25-A
-
Extends to 8.5 feet
-
135mm height, graduated in centimeters and .01 ft.
-
Locking pin holes at 6.5 ft, 7.0 ft, 7.5 ft, 8.0 ft, 8.5 ft
-
40’ vial
-
Weighs 3.15 lbs (1.43 kg)
Robotics Carbon Fiber, Two Section Prism Pole
PN: 5129-72, 5129-52-SW, 5129-53-SW, 5129-72-SW, 5129-73-SW
-
These carbon fiber telescoping poles are graduated to read direct for a 135 mm prism height
-
Adapters will achieve other prism heights
-
Features include a stainless steel pin which locks the inner pole
-
Holes are spaced every 0.5 ft
-
Poles include the popular TLV™ lock which has a 40-minute vial built-in
-
Inner poles have dual graduations: centimeters and 10ths
-
Collapse to 5.18 ft (1.58 m) and extend to 11.81 ft (3.6 m)
-
Weighs 3.30 lb (1.50 kg)
Carbon Fiber TLV Pole
PN: 5129-54
-
Features dual graduations, an adjustable tip that will adjust to a prism height of 65 mm-to-115 mm
-
TLV™ Lock
-
Carbon fiber poles are approximately 30% lighter than similar aluminum poles
-
Extends 8.53 ft (2.60 m) and collapses to 4.97 ft (1.51 m)
-
Weighs 2.30 lb (1.05 kg)
Ask about our complete line!
8.5 ft Quick-Release Pole – Adjustable Tip
PN: 5700-10, 5720-10
-
40-minute level vial is located on the lock, away from the instruments on the pole
-
The Quick-Release locking mechanism features adjustable tension via a set screw in the handle and another set screw to assist in keeping the spring in position
-
Simple and fast setup
-
One-section pole
-
Dual Grad (10ths/cm)
-
Adjustable Tip
-
Powder-coated and silk screened aluminum
-
Red and White
-
8.53 ft (2.60 m) extended, 4.97 ft (1.52 m) closed
-
Weighs 3.30 lb (1.50 kg)
-
5720-10: 2.6 m Quick-Release Pole
8.5 ft TLV Pole – Red and White
PN: 5500-11, 5500-21, 5500-30
-
Wear-resistant for long life
-
One-section pole
-
The soft rubber knob is easy to tighten or loosen, even when wearing gloves
-
TLV lock features a convenient 40-minute vial built into the lock
-
Dual Grad (0.01 ft/cm)
-
Adjustable Tip
-
Powder-coated and silk screened aluminum
-
Red and White
-
8.53 ft (2.60 m) extended, 4.97 ft (1.516 m) closed
-
Weighs 3.30 lb (1.50 kg)
8.6 ft TLV-Style Pole (Construction Series)
PN: 5530-10, 5530-20, 5530-30, 5531-10, 5531-20, 5531-30
-
This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price
-
Aluminum outer and inner pole
-
40-minute level vial
-
Adjustable tip
-
Dual Grad (0.01 ft/cm)
-
Hardened steel points
-
TLV Locking mechanism
-
Red and White
-
8.53 ft (2.60 m)
-
Weighs 2.67 lb (1.21 kg)
8.5 ft QLV Pole with Adjustable Tip
PN: 5801-10, 5813-10
-
The Quick Lever with Vial (QLV™) allows fast, simple setups
-
Easy locking
-
One-section pole
-
Includes a lock with 40-minute level vial
-
Adjustable tip
-
Dual Grad (0.01 ft/cm)
-
Simple to adjust bubble and lever tension
-
Powder-coated and silk screened aluminum
-
Red and White
-
8.53 ft (2.60 m) extended, 4.97 ft (1.516 m) closed
-
Weighs 2.95 lb (1.50 kg)
Quick Change Adapter For Adjustable 5/8 x 11
PN: 2090-14
-
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
-
For: Adjustable 5/8 x 11
-
Target Height: 50 mm to 115 mm
-
Weighs 0.29 lb (0.13 kg)
Quick Change Adapter For Leica Adjustable
PN: 2090-16, 2090-17
-
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
-
For: Leica Adjustable
-
Target Height: 86 mm to 125 mm
-
Weighs 0.34 lb (0.15 kg)
Quick Change Adapter For Laser Detector Adapter
PN: 5079-066
-
This new laser detector adapter turns any Quick Change Pole into a laser grade rod
-
Use it for digging footings and measuring elevations
-
Works with the standard detector rod clamp that comes with the detector
-
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
-
Machined anodized-aluminum for superior strength and weight concerns
-
Height: 150 mm
-
Weighs 0.60 lb (0.27 kg)
12 ft Quick-Release Pole – Adjustable Tip
PN: 5700-20
-
40-minute level vial is located on the lock, away from the instruments on the pole
-
The Quick-Release locking mechanism features adjustable tension via a set screw in the handle and another set screw to assist in keeping the spring in position
-
Simple and fast setup
-
Two-section pole
-
Dual Grad (10ths/cm)
-
Adjustable Tip
-
Powder-coated and silk screened aluminum
-
Red and White
-
11.81 ft (3.60 m) extended, 5.18 ft (1.58 m) closed
-
Weighs 5.10 lb (2.30 kg)
8.5 ft TLV Pole – Red and White
PN: 5512-11, 5520-11, 5520-21, 5520-30
-
Wear-resistant for long life
-
One-section pole
-
The soft rubber knob is easy to tighten or loosen, even when wearing gloves
-
TLV lock features a convenient 40-minute vial built into the lock
-
Fixed Tip
-
Dual Grad (0.01 ft/cm)
-
Powder-coated and silk screened aluminum
-
Red and White
-
8.53 ft (2.60 m) extended, 4.97 ft (1.516 m) closed
-
Weighs 3.30 lb (1.50 kg)
2.5 m Compression Locking Pole (Construction Series)
PN: 5631-10, 5631-20, 5631-30, 5600-10
-
This ‘no-frills’ imported one-section pole is designed to give service in the field at a lower purchase price
-
Aluminum outer and inner pole
-
40-minute level vial
-
Fixed tip
-
Hardened steel points
-
Compression locking
-
Metric Grad (cm)
-
Red and White
-
2.50 m (8.53 ft)
-
Weighs 2.65 lb (1.20 kg)
Quick Change Adapter
PN: 2090-10, 2090-11, 2090-12, 2090-13
-
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
-
For: Leica GPH1, Zeiss, Trimble RMT, Seco 6400
-
Target Height: 86 mm
-
Length: 50 mm
-
Weighs 0.19 lb (0.09 kg)
Quick Change Adapter For GPS Antenna
PN: 2090-15
-
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
-
For: GPS Antenna
-
Target Height: 0 mm
-
Length: 150 mm
-
Weighs 0.22 lb (0.10 kg)
Quick Change Adapter
PN: 2090-19, 2090-21, 2090-26
-
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
-
For: SECO Mini Prisms & Topcon 360
-
Target Height: 70 mm
-
Length: 80 mm
-
Weighs 0.27 lb (0.12 kg)
Ask about our complete line!
25 cm/1.25 inch OD Carbon Fiber Extension
PN: 5145-02
-
The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
-
1.25 inch (32 mm) outside diameter
-
25 cm in length
-
Weighs 0.35 lb (0.16 kg)
60 mm Anti-Rotation Quick Release
PN: 5111-04
-
Anti-rotation quick-release assembly
-
Converts any GNSS receiver or prism with 5/8 x 11 threads to a quick release
-
Heavy-duty construction, will hold up to 20 lb (9.00 kg)
-
Short height, only 60 mm
-
Constructed of quality stainless steel and aluminum
-
Easy to operate, push button release
-
Weighs 0.35 lb (0.16 kg)
Mini 5.1 ft (1.55 m) TLV Pole
PN: 5500-23
-
Features dual grads (0.01 ft/cm), adjustable tip and TLV™ lock including 40-minute vial on the lock
-
Extends to 5.10 ft (1.55 m)
-
Collapses to 2.70 ft (0.82 m)
-
Prism Height 115 cm
-
Color: Red
-
Weighs 2.30 lb (1.04 kg)
Handheld Mini Rod
PN: 5010-01
-
Height of 120 mm (0.394 ft)
-
40-min vial
-
Removable tip
-
Weighs 0.40 lb (0.18 kg)
-
Replacement Point: Standard 5194-05
Aluminum Swiss Style with QLV Lock
PN: 5802-10
-
This robotics 8 ft pole features the new QLV locking mechanisms
-
The lower lock features an adjustable 40-minute adjustable vial
-
The small-diameter, 25-mm bottom section fits Leica slide on controller brackets
-
Swiss-style quick release stud and reads direct for any 86 mm height prisms
-
Dual Grads (10ths and Metric)
-
Weighs 2.50 lb (1.13 kg)
Swiss-style TLV Pole – Metric Grad
PN: 5521-11
-
Features metric graduations for GPH1-type prisms, a Swiss-style tip (for 86 mm prism heights) and TLV™ lock
-
Extends to 8.53 ft (2.60 m)
-
Collapses to 4.97 ft (1.51 m)
-
Outside diameter of 1.25 inches (31.75 mm)
-
Weighs 3.30 lb (1.50 kg)
8.5 ft Ultralite Pole with TLV Lock
PN: 5540-10, 5541-10, 5541-20
-
The Ultralite™ is the lightest, most user-friendly, pole on the market
-
TLV™ (Twist lock with vial) reduces weight while providing secure locking function
-
Two-section pole
-
Inner and outer poles are constructed of lightweight non-conductive fiberglass
-
Includes removable point and our patented Topo Boot®
-
Soft touch knob
-
40-minute adjustable vial
-
Adjustable Tip (5/8 x 11)
-
Dual Grad (0.01 ft/cm)
-
8.58 ft (2.62 m) 5541-20 (3.6 m), 5541-30 (4.65 m)
-
Weighs 1.95 lb (0.88 kg)
4.65 m Ultralite Pole with TLV Lock
PN: 5541-30
-
The Ultralite™ is the lightest, most user-friendly, pole on the market
-
TLV™ (Twistlock with vial) reduces weight while providing the outstanding locking functionality
-
Three-section pole
-
Inner and outer poles are constructed of lightweight non-conductive fiberglass
-
Includes removable point and patented Topo Boot®
-
Soft touch knob
-
40-minute adjustable vial
-
Adjustable Tip (5/8 x 11)
-
Metric Grad (cm)
-
4.65 m (15.27 ft)
-
Weighs 3.15 lb (1.43 kg)
Offset Pole Holder Kit
PN: 5198-157
-
Perform odd setups and stay away from dangerous situations with the Offset Pole Holder Kit
-
Combine the kit with any 5/8 x 11 threaded pole and a Heads-Up™ Level for a safe and sturdy setup
-
A padded case, hex wrench, and an adapter plate for instrument tripods are included
-
Weighs 2.20 lb (1.00 kg)
3 inch Extension/1 inch OD
PN: 5182-001
-
Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
-
3 in (7.62 cm) in Length
-
1 in (25 mm) Outside Diameter
-
Weighs 0.40 lb (0.18 kg)
1 ft Extension/1 inch OD
PN: 5130-01-FLY, 5131-01-FLY, 5901-00-FLY, 5110-01-FLY, 5145-00-FLY, 5130-00-FLY, 5144-00-FLY
-
Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
-
1 ft (30.5 cm) in Length, 2 ft. (5131-01-FLY) 1 meter (5901-00-FLY), 4 ft. (5110-01-FLY) 25 cm (5145-00-FLY), 50 cm. (5144-00-FLY)
-
1 in (25 mm) Outside Diameter
-
Flo Yellow
-
Weighs 1.00 lb (0.45 kg)
Mini Stakeout Pole
PN: 5010-00-FLY, 5010-00-RED
-
Measures 1.28 feet (0.39 m)
-
5/8 x 11 Threads
-
Fluorescent Yellow & Red
-
Weighs 1.50 lb (0.68 kg)
-
Replacement Point: Standard 5194-05
Mini Quick-Release Pole – 4.8 Ft (1.5 m)
PN: 5700-21
-
Extends to 4.80 ft (1.5 m) and collapses to 2.26 ft (0.7 m)
-
Dual graduations: tenths and mm increments
-
Constructed of sturdy aluminum
-
Quick-Release Lock and 40 minute vial
-
Weighs 2.33 lb (1.80 kg)
Swiss-style TLV Pole - Dual Grad
PN: 5501-11
-
Features dual graduations for GPH1-type prisms, a Swiss-style tip (for 86 mm prism heights) and TLV™ lock
-
Extends to 8.53 ft (2.60 m)
-
Collapses to 4.97 ft (1.51 m)
-
Outside diameter of 1.25 inches (31.75 mm)
-
Weighs 3.30 lb (1.50 kg)
Swiss-style Twisting Lock Pole
15.25 ft (4.65 m)
PN: 5503-30
-
This pole is graduated for GPH1-type prisms
-
Features a Swiss-style tip and twist locking
-
Extends to 15.25 ft (4.65 m)
-
Collapses to 5.41 ft (1.65 m)
-
Outside diameter of 1.5 inches (38.1 mm)
-
For 86 mm prism heights
-
Weighs 7.60 lb (3.45 kg)
12 ft / 15ft Ultralite Pole with TLV Lock
PN: 5540-20, 5540-30
-
The Ultralite™ is the lightest, most user-friendly, pole on the market
-
TLV™ (Twist lock with vial) reduces weight while providing secure locking function
-
Two-section pole
-
Inner and outer poles are constructed of lightweight non-conductive fiberglass
-
Includes removable point and our patented Topo Boot®
-
Soft touch knob
-
40-minute adjustable vial
-
Adjustable Tip (5/8 x 11)
-
Dual Grad (0.01 ft/cm)
-
11.81 ft (3.60 m)
-
Weighs 2.50 lb (1.13 kg)
Adjustable Offset Bar
PN: 5198-163
-
This adjustable offset bar can be used with total stations and prism poles to help get accurate elevation measurements in hard-to-reach places
-
Used with any standard survey pole
-
It has an adjustable centerline, 1.60 to 1.00 ft (48.76 to 30.48 cm) in 0.20 ft (6.09 cm) increments
-
The offset bar is ideal to measure sewer inverts down manholes or odd surfaces on bridges and construction sites
-
Constructed of anodized 1/2 inch thick aluminum
-
-
Features include: brass male 5/8 x 11 threaded post and a stainless steel 5/8 x 11 Heli-Coil®
-
Weighs 1.15 lb (0.52 kg)
4 ft Range Pole
PN: 5160-02-WOR, 5140-02-WOR, 5150-02-WOR
-
4 ft (1.2 m) Range Pole
-
One 4-ft section
-
1.13 in (29 mm) Outside Diameter
-
Includes Carrying Bag
-
4ft., 8ft. (5140-02-WOR), 12ft. (5150-02-WOR)
-
Weighs 1.50 lb (0.68 kg)
6 inch Extension/1 inch OD
PN: 5132-00-ACL
-
The Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
-
1 in (25 mm) Outside Diameter
-
6 in (15.2 cm) in Length
-
Weighs 0.50 lb (0.23 kg)
2 ft Extension/1.25 inch OD
PN: 5131-00-YEL
-
Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
-
2 ft (61 cm) in Length
-
1.25 in (32 mm) Outside Diameter
-
Standard Yellow
-
Weighs 1.10 lb (0.50 kg)